The aluminum coil lamination process is a process in which a film material (usually a plastic film) is applied to an aluminum coil (aluminum coil is a continuously produced aluminum sheet coil). By covering the surface of the aluminum roll, the film can provide additional protection and decoration.
The following are the general aluminum coil lamination process steps:
1. Prepare the aluminum coil: Unwrap the aluminum coil and clean and degrease it to ensure the surface is clean.
2. Prepare the film: Select the appropriate film material, cut and organize according to needs.
3. Fix the film: Transfer the aluminum roll to the laminating machine through rollers, and place the film on the laminating machine at the same time, ensuring the correct position.
4. Laminating treatment: The aluminum coil and the film are sent to the laminating device through the transmission system, and the device will bond the film to the surface of the aluminum coil and make it fit tightly.
5. Compaction: Pass the coated aluminum coil through a compaction device to ensure the adhesion and flatness between the film and the surface of the aluminum coil.
6. Cutting and packaging: Cut and package the coated aluminum coils as needed.
The aluminum coil coating process is mainly used in the fields of aluminum coil production, such as construction, decoration, electronics, food packaging, etc. It can provide certain protection and aesthetic effects, while also increasing the service life and value of the aluminum coil.