Color-coated sheets for home appliances are usually based on electro-galvanized and cold sheets

Color-coated panels for construction are usually based on hot-dip galvanized steel sheets and hot-dip galvanized steel sheets. Roofs, walls, doors of commercial buildings.
Color-coated sheets for home appliances are usually based on electro-galvanized and cold sheets, which are used in the production of refrigerators and large air-conditioning systems, freezers, bread machines, furniture, etc. Precautions for shearing and processing of color-coated plates: The table that touches the color-coated plate during cutting should be covered with a rubber pad and kept clean, to minimize the burrs on the cut surface, and promptly remove the chips and metal burrs that occur during cutting to coat The steel plates scratch each other when they are sheared and stacked.
Do not get wet by water, store indoors, and avoid stacking in the open air. If there is condensation due to rain, unpack the package immediately to remove moisture and use it as soon as possible. Try to keep it in the state when it leaves the factory, and do not pile it up to avoid damage to the coated steel coil and steel plate. During loading and unloading, spreaders must be used in order to avoid bumps and strangulation.