How to choose wall panels suitable for bank decoration

With the use of coated steel wall panels as a common material for decorative wall panels, more and more public places are now using coated steel wall panels, so as a banking institution, how to choose a suitable coated steel wall panel What about quality wall panels?
1. What is the type of steel wall panel structure used in banks?
At present, the steel wall panels of bank wall panels generally adopt a close-fitting structure. After the wall is installed, all the steel plates are on the same plane, and the middle is spliced with natural gaps. Because some selection posters are often pasted on the walls of banking institutions, it is natural The gap is more beautiful and convenient.
2. What are the technical specifications for bank steel wall panels?
Because the bank hall is a public place with a large flow of people, the surface of the steel plate needs to have certain anti-collision and anti-scratch performance. Usually, 0.8mm galvanized steel plate is used as the base material, and the interior is filled with 12mm gypsum board or corrugated board. The surface of the steel plate is made of Laminating process processing.
3. What are the construction specifications for bank steel wall panels?
Steel wall panels for banks, the internal skeleton is 40*20*1.5mm keels as the steel skeleton, the keel spacing must not exceed 600, and the width of the board exceeds 600, in addition to the need for keels at the joints, the keel is also required in the middle of the board. After the support and keel installation is completed, find out the ground level and install the skirting line to ensure the level of the skirting line, and then install the wall panels. The wall panels and the ceiling overlap. The board is first made into the interior of the ceiling, and then the ceiling closing strip is hit on the wall board to close.