Color steel plate production and installation is now a relatively mature work, but if you don’t pay attention, there will still be some problems, and for the problem of color steel edge trimming, here is a brief overview of its related processes.
The edge closing of the color steel plate is generally implemented before the color steel plate is positioned. Of course, it is the same after the installation is completed, but this kind of implementation needs to leave enough space at the top of the color steel plate. The specific color steel plate edge finishing process is to place the edge finishing tool on the color steel plate chassis, hold the terminal of the color steel plate with the tool, and fold the chassis upward. When the board is used on the roof with a slope of less than 1/5, the bottom of the color steel plate is slightly bent downward to ensure that the rainwater is replaced along the color steel terminal. At the same time, the downward folding operation can only be performed after the color steel plate is fixed, otherwise the operation will be hindered. When folding down the edge of the color steel plate, properly open the opening of the prying tool, clamp the tool to the end of the chassis, and try to push it inward. The tool is tightly attached to the end of the chassis while shaking the handle about 200, so that a downward fold will be formed at the end of the color steel plate. Thereby finishing the edge finishing of the color steel plate. Convenient for the use of color steel plates.
