I believe that many people have used color steel plates, and there are many types of color steel plates. Due to the different processing techniques of the manufacturers, the color steel plates manufactured are also used for different purposes. However, the surface of the color steel plate will be coated, so the processing method of the color steel plate is different from that of the ordinary steel plate. The following briefly introduces the processing technology of the color steel plate.
1. In the process of color steel plate processing, especially when cutting, reduce the burrs on the cutting surface. In order to remove the metal powder during the cutting process, we also need to place a rubber pad under it to prevent the color steel plate from damaging the surface during the stacking process.
2. Before bending, remove the dirt and rust on the mold, punch and other parts;
3. The temperature is controlled above 5 degrees Celsius;
4. If it is a rolling process, the roller should be made of hard material or coated with material.
The development of the national economy is inseparable from the development of industry, and factory parks throughout the country are constantly emerging. Each factory leasing company will also renovate the factories according to their own conditions to meet their own needs. Under such circumstances, the partition of the indoor color steel plate and composite plate appeared, which conveniently met the requirements of the enterprise for plant renovation. However, many companies have a lot of troubles in the professional design of partitions. Here is a brief introduction to some knowledge in this area.
According to their actual use, check the structure of the plant. If you simply divide the area, you can directly make a partition surface. Determine the length, width, and height of the partition wall, and use steel pipes to reinforce the structure. It is normal to erect beams and columns with 4m as the break point. To determine the beams and columns, you need to weld the crosspiece steel pipe, generally 1.5m plus a crosspiece, so that the structure can be strengthened. If a door is needed, use a square pipe to reinforce it around the door opening. When the entire partition structure is completed, the wall panels can be sealed. For single-layer color steel plates, type 900 or 840 are usually used to seal the wall, and type 950 or 1125 sandwich panels are used to seal the wall.
